|
Self Tapping Screws |
There are two basic
types V AB (Pointed) and B (Blunt). Type AB is ideal
for joining thin sheet steel and is used extensively in
spring nut and clip applications. It can also be used,
but not recommended for, pliable plastics, high impact
plastics, resin bonded plywood and aluminum die castings.
Type B has the same thread form but, with its tapered
pilot lead, is designed for use in heavier gauge sheet
steel and structural steel sections. It gives optimum
thread engagement in blind hole applications
and is ideal for pliable plastic and non-ferrous zinc
and aluminum die-castings. |
|
Application: |
Recommended Screw: |
For general fixings,
eg. Spotlights, doors, security alarms, light
switches, wall phones etc. |
Pan Head
|
|
|
application: |
Recommended Screw: |
Recommended
for all general fixing into timber and light
gauge metal, for applications where a countersunk
head is required.
|
Bugle Head -
Needle Point
|
|
DIN
7971 Tapping Screw
Pan Head phillips
SIZE: |
2.9x6.5-19
3.5x9.5-25
3.9x9.5-25
4.2x9.5-32
4.8x9.5-38
5.5x16-50
6.3x16-50 |
|
DIN
7972 Tapping Screw
Flat Head With Slot
SIZE: |
2.9x6.5-19
3.5x9.5-25
3.9x9.5-25
4.2x9.5-32
4.8x9.5-38
5.5x16-50
6.3x16-50 |
|
|
|
DIN
7981 Tapping Screw
Pan Head
Phillips or Pozi Recess
SIZE: |
2.9x6.5-19
3.5x9.5-25
3.9x9.5-25
4.2x9.5-32
4.8x9.5-38
5.5x16-50
6.3x16-50 |
|
Din
7982 Tapping Screw
Countersunk Head
Phillips or Pozi Recess
SIZE: |
2.9x6.5-19
3.5x9.5-25
3.9x9.5-25
4.2x9.5-32
4.8x9.5-38
5.5x16-50
6.3x16-50 |
|
|
DIN
7983 Tapping Screw
Oval Head
Phillips or Pozi Recess
SIZE: |
2.9x6.5-19
3.5x9.5-25
3.9x9.5-25
4.2x9.5-32
4.8x9.5-38
5.5x16-50
6.3x16-50 |
|
Tapping Screw
Hex Washer Head
With or Without Washers SIZE:6.3x16 (#14x5/8")
- 6.3x75(#14x3") |
|
DIN
6928 hexagon washer head
tapping screw
SIZE: |
2.9x6.5-19
3.5x9.5-25
3.9x9.5-25
4.2x9.5-32
4.8x9.5-38
5.5x16-50
6.3x16-50 |
|
DIN968
phillips or pozi Truss head with colla self tapping screw
|
Truss head phillps self tapping screw |
|
|
|