| Pan Phillips
Size(inch)G6-20x3/8"-10-16x2"
Diameter(mm)G3.5-4.8
Length(mm)G10-50
Point NO.G#2-#3
Material Thickeness(mm)G0.9-2.5 // 2.8-4.4 |
Countersunk Phillips
Size(inch)G6-20x3/8"-10-16x1"
Diameter(mm)G3.5-4.8
Length(mm)G10-38
Point NO.G#2-#3
Material Thickeness(mm)G0.9-2.5 // 2.8-4.4
|
| Hex. Washer Head
Size(inch)G6-20x3/8"-14-14x4"
Diameter(mm)G3.5-6.3
Length(mm)G10-100
Point NO.G#2-#3
Material Thickeness(mm)G0.9-2.5 // 2.8-5.5
|
Type 17 Wood Screw
Size(inch)G12-11x25-1" // 14-10x100-4"
Diameter(mm)G5.5-6.3
Length(mm)G25-100
|
| Hex Washer Flange
Size(inch)G12-24x19-3/4"
// 12-24x125-5"
Diameter(mm)G5.5
Length(mm)G19-125
Point NO.G#3
Material Thickeness(mm)G2.8-5.3
|
Bugle Phillips
Size(inch)G6-20x1"-8-18x3"
Diameter(mm)G3.5-4.2
Length(mm)G25-75
Point NO.G#2
Material Thickeness(mm)G0.9-2 |
Wafer Phillips
Size(mm)G10-16x16-10-24x38
Diameter(mm)G4.8
Length(mm)G16-38
Point NO.G#3
Material Thickeness(mm)G2.8-4.4 .5
|
Truss Phillips
Size(inch)G8-18x5/8"-8-18x1-1/4"
Diameter(mm)G4.2
Length(mm)G13-41
Point NO.G#2
Material Thickeness(mm)G0.9-2.5 |
|
| Countersunk wings
#10 X 1-5/8 4.8 X 25m/m 5.5
X 38 m/m
#12 X 2 4.8 X 32m/m 5.5 X 50 m/m
#12 X 2-1/2 4.8 X 38m/m 5.5 X 55 m/m
4.8 X 45 m/m 5.5 X 70 m/m |
Countersunk sings / point#4
5.5 X 50m/m 5.5 X 110 m/m
5.5 X 80m/m 5.5 X 120 m/m
5.5 X 90m/m #14 X 2-3/4 |
Large wafer / wings
#10 1-7/16 |
Din 7976 hex head
6.3 X 19m/m 6.3 X 38 m/m
6.3 X 25m/m 6.3 X 50 m/m
6.3 X 32m/m 6.3 X 75 m/m
6.3 X 90 m/m |
Pan
framing Phillips
#6 7/16
#7 7/16 |
Hex washer head / point#5
12 V24 X 1-1/4 5.5 X
32 m/m
12 V24 X 1-1/2 5.5 X 38 m/m
12 V24 X 2 5.5 X 50 m/m |
Hex washer head spoon point
#13 X 32 m/m
#13 X 40 m/m
#13 X 55 m/m |
Hi-lo thread / diamond point
#13 X 32 m/m
#13 X 40 m/m
#13 X 55 m/m |
Double thread / type 17
#14-10/ 14 X 60 m/m
#14-10/ 14 X 80 m/m
#14-10/ 14 X 100 m/m
#14-10/ 14 X 125 m/m |
Double thread / point #5
#14-10/ #12-24 X 75 m/m
#14-10/ #12-24 X 90 m/m
#14-10/ #12-24 X 105 m/m
#14-10/ #12-24 X 120 m/m |
Double thread
/ point #3
#14-10/ #12-24 X 60 m/m @@#14-10/
#12-24 X 120 m/m
#14-10/ #12-24 X 80 m/m@@ #14-10/ #12-24 X 140
m/m
#14-10/ #12-24 X 100 m/m @ #14-10/ #12-24 X 160
m/m |
Double thread reduced point
4.0 X 60m/m
4.8 X 70m/m
4.8 X 80m/m
|
4.0 X 90 m/m
4.8 X 100m/m
4.8 X 110 m/m |
4.0 X 120 m/m
4.8 X 140 m/m
4.8 X 130 m/m
|
4.0 X 150 m/m
4.8 X 160 m/m
4.8 X 170 m/m
4.8 X 180 m/m |
|
Stitch
#14 X 7/8 6.3 X 22 m/m
#14 X 1 6.3 X 25 m/m |
Pilot
5.5 X 25 m/m
5.5 X 32 m/m
5.5 X 38 m/m
5.5 X 48 m/m |
Hex washer head wing up with washer
6.3 X 105 m/m
6.3 X 115 m/m
6.3 X 125 m/m
6.3 X 145 m/m
6.3 X 155 m/m |
Type-17/ hex washer head wing up with washer
6.3 X 105 m/m
6.3 X 115 m/m
6.3 X 125 m/m
6.3 X 145 m/m
6.3 X 155 m/m |
Hex washer head wing up/ point #5 with washer
6.3 X 110 m/m
6.3 X 120 m/m
6.3 X 130 m/m
6.3 X 150 m/m
6.3 X 160 m/m |
Countersunk head reduced point
4.0 X 60m/m 4.8 X 110 m/m
4.8 X 70m/m 4.0 X 120 m/m
4.8 X 80m/m 4.8 X 130 m/m
4.0 X 90 m/m 4.8 X 140 m/m
4.8 X 100m/m 4.0 X 150 m/m |
